Call for Sales and Service: 1-800-889-3751
raspberry pi av controller

CM4-PRO

The CM4-PRO is an industrial-grade control processor powered by the Raspberry Pi CM4. The CM4-PRO supports supports PoE. It features a powerful Quad Core Processor (Cortex-A72 (ARM v8) 64-bit SoC @ 1.5Ghz), and comes pre-assembled and flashed with the Parallax Control Engine, providing a reliable and efficient solution for AV control applications.

powered by raspberry pi4
  • (1) Full Size HDMI Port for basic digital signage
  • (1) 1Gbps PoE Ethernet
  • (1) 10/100 Ethernet port
  • (2) USB-A Port (not currently in use)
  • (1) Wall Mount Ears, (1) DIN Rail Mount

Processing and Memory:

  • 4GB RAM, 8GB eMMC
  • (1) RS-232 Serial Port
  • (2) RS485 channels
  • (3) ADC interfaces
  • (2) Isolated digital input detection interfaces
  • (2) Double-pole double-throw relay
  • (1) 5Ghz WiFi Antenna
  • (1) 4G Antenna (not currently in use)
  • (1) Wall Mount Ears, (1) DIN Rail Mount

Additional Information

Data Sheets

CM4 Pro Technical Manual:

https://www.edatec.cn/uploads/soft/230720/INDuser-en.pdf

Reference this sheet for accessing the onboard I/O port configuration of the CM4-PRO:

https://www.edatec.cn/uploads/soft/230407/CM4INDdatasheet-en.pdf 

General info on the CM4 Compute Module:

https://datasheets.raspberrypi.com/cm4/cm4-datasheet.pdf 

Software, Firmware and Downloads
Additional Features

Digital Signage Player

Features:

-4k video playback

-24/7 Video Loop Option

-Store multiple videos on device

raspberry pi digital signage player

Digital Signage Control Page:

USB Camera Streaming

Stream HDMI content from one encoder to many decoders. Use a capture card (not included) to convert HDMI to USB as content input. Or plug a USB PTZ Camera directly in to extend over the network.

Note: Current video transmission delay is ~0.5s

CM4-NANO

The CM4-NANO is an industrial-grade control processor that is powered by the Raspberry Pi CM4. It is equipped with a powerful Quad Core Processor (Cortex-A72 (ARM v8) 64-bit SoC @ 1.5Ghz), and comes pre-assembled and flashed with the Parallax Control Engine, providing a reliable and efficient solution for control applications.

powered by raspberry pi4
  • (1) Full Size HDMI Port
  • (1) 1000mbps port
  • (2) USB-A 3.0 Port
  • (1) USB-A 2.0 Service Port
  • (3) Full 40-Pin Header Block with LED state Indicator
  • 4GB RAM, 8GB eMMC 
  • 8GB Industrial SD Card for Digital Signage Media Storage
  • (1) 2.4/5.8 Ghz Antenna for Touch panel Wireless Access Point, or WiFi.
  • (1) Wall Mount Ears, (1) DIN Rail Mount Clip
  • (1) Industrial enclosure with passive cooling
  • (1) Power supply plug

Additional Information

Data Sheets

General info on the CM4 Compute Module:

https://datasheets.raspberrypi.com/cm4/cm4-datasheet.pdf 

Reference this sheet for accessing the onboard I/O port configuration of the CM4-NANO:

https://www.edatec.cn/uploads/soft/230817/CM4NANOdatasheet-en.pdf

Software, Firmware and Downloads
Additional Features

Digital Signage Player

Features:

-4k video playback

-24/7 Video Loop Option

-Store multiple videos on device

raspberry pi digital signage player

Digital Signage Control Page:

USB Camera Streaming

Stream HDMI content from one encoder to many decoders. Use a capture card (not included) to convert HDMI to USB as content input. Or plug a USB PTZ Camera directly in to extend over the network.

Note: Current video transmission delay is ~0.5s

TP-10L-POE

10″ L-Shape Android touch-panel with PoE.

  • Hidden power button sequence controls app lock/unlock.
  • Can be set to boot straight to project UI on restart.
  • Easily load new UI project by USB, or over the network.
  • Can communicate with control processor by wireless or wired connection. 
  • PoE Power Over Ethernet.
  • 12v Power Supply included.

Additional Information

Catalog & Brochures

N/A

Data Sheets

N/A

Softwares and Firmwares

Download Unity Software (not included):

https://unity.com/

Parallax Control Engine Plugin for Unity Software: